225 x 30 x 141 mm
The TP-Link TL-WR1043ND v4 was launched in 2016 and is a N450 class router.
The router comes in at a weight of 830 g and dimensions of 225 x 30 x 141 mm.
|225 x 30 x 141 mm|
Mobile networks are not supported.
The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats.
The coverage is supported by 3 x 5 dBi RP-SMA antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.
The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 450 Mbps.
Security protocols offered by the TP-Link TL-WR1043ND v4 are WEP WPA WPA2.
|3 x 5 dBi RP-SMA|
|WEP WPA WPA2|
It's powered by a Qualcomm Atheros QCA9563 @ 750 MHz processor, and contains 64 MB of ram.
The power supply is a 12 V / 1.5 A power supply.
So if you're looking for a 12v router, this might the one!
The router supports the IPv4 IPv6 protocols.
|Qualcomm Atheros QCA9563 @ 750 MHz|
|12 V / 1.5 A|
You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available.
|4 x 10/100/1000 Mbps|
|1 x 10/100/1000 Mbps|
|1 x USB 2.0|
The Default IP to login to the admin area of the TP-Link TL-WR1043ND v4 is 192.168.1.1.
You can log in to the router by using the username "admin" and the password of "admin" provided it hasn't been changed.