About Netis
Netis MW5230
Class
N300
Launch Date
2016
Wifi Standards
IEEE 802.11b/g/n
Description
Specification
| Overview The Netis MW5230 was launched in 2016 and is a N300 class router. | |||
|---|---|---|---|
Brand | Netis | ||
Launch Date | 2016 | ||
Class | N300 | ||
Model | MW5230 | ||
Type | MW5230 | ||
| Network Mobile networks are supported. The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats. The coverage is supported by 3 x 5 dBi fixed antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range. The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 300 Mbps. Security protocols offered by the Netis MW5230 are WEP WPA WPA2 WPS. | |||
Mobile Network | yes, with USB dongle | ||
Security | WEP WPA WPA2 WPS | ||
VPN Support | no | ||
Transmit Power | 20 dBm | ||
Wifi Speed | 300 Mbps | ||
Guest Network | no | ||
Antennas | 3 x 5 dBi fixed | ||
Wifi Standards | IEEE 802.11b/g/n | ||
| Connectivity You're looking at 4 x 10/100 Mbps LAN (local area network) connection ports, with 1 x 10/100 Mbps WAN (wide area network) ports available. | |||
WAN Ports | 1 x 10/100 Mbps | ||
Usb Ports | 1 x USB 2.0 | ||
Print Server | yes | ||
LAN Ports | 4 x 10/100 Mbps | ||
File Server | yes | ||
| System It's powered by a Realtek RTL8197D @ 660 MHz processor, and contains 64 MB of ram. The power supply is a 12 V / 1 A power supply. So if you're looking for a 12v router, this might the one! The router supports the IPv4 protocols. | |||
Operating System | Netis | ||
Chipset | Realtek RTL8197D @ 660 MHz | ||
Protocols | IPv4 | ||
Flash | 16 MB | ||
Ram | 64 MB | ||
Power Supply | 12 V / 1 A | ||
| Login/Admin Details The Default IP to login to the admin area of the Netis MW5230 is 192.168.1.1. You can log in to the router by using the username "[blank]" and the password of "[blank]" provided it hasn't been changed. | |||
Default Username | [blank] | ||
Default IP | 192.168.1.1 | ||
Default Password | [blank] | ||
