114 x 137 x 29 mm
The MikroTik RouterBoard hAP AC was launched in 2016 and is a AC1000 class router.
|114 x 137 x 29 mm|
|RouterBoard hAP AC|
Mobile networks are supported.
The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats.
The coverage is supported by 3 x 2.5 dBi internal antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.
The Wifi standards offered are IEEE 802.11a/b/g/n/ac and they're offering connection speeds of 150 + 867 Mbps.
Security protocols offered by the MikroTik RouterBoard hAP AC are WPA.
|yes, with USB dongle|
|150 + 867 Mbps|
|3 x 2.5 dBi internal|
You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available.
|1 x 10/100/1000 Mbps|
|1 x USB 2.0|
|4 x 10/100/1000 Mbps|
It's powered by a Qualcomm Atheros QCA9558 @ 720 MHz processor, and contains 128 MB of ram.
The power supply is a 24 V / 1.2 A power supply.
The router supports the IPv4 IPv6 protocols.
|Qualcomm Atheros QCA9558 @ 720 MHz|
|24 V / 1.2 A|
The Default IP to login to the admin area of the MikroTik RouterBoard hAP AC is 192.168.88.1.
You can log in to the router by using the username "admin" and the password of "[blank]" provided it hasn't been changed.