230 x 230 x 43 mm
The TP-Link Archer C5400 was launched in 2016 and is a AC5300 class router.
|230 x 230 x 43 mm|
Mobile networks are not supported.
The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats.
The coverage is supported by 8 x external antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.
The Wifi standards offered are IEEE 802.11a/b/g/n/ac and they're offering connection speeds of 1000 + 2167 + 2167 Mbps.
Security protocols offered by the TP-Link Archer C5400 are WEP WPA WPA2 WPS.
|8 x external|
|1000 + 2167 + 2167 Mbps|
|WEP WPA WPA2 WPS|
It's powered by a Broadcom BCM4709C0 @ 1.4 GHz processor, and contains 512 MB of ram.
The power supply is a 12 V / 5 A power supply.
So if you're looking for a 12v router, this might the one!
The router supports the IPv4 IPv6 protocols.
|Broadcom BCM4709C0 @ 1.4 GHz|
|12 V / 5 A|
You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available.
|4 x 10/100/1000 Mbps|
|1 x 10/100/1000 Mbps|
|1 x USB 2.0 1 x USB 3.0|
The Default IP to login to the admin area of the TP-Link Archer C5400 is 192.168.0.1.
You can log in to the router by using the username "admin" and the password of "admin" provided it hasn't been changed.