About MikroTik
MikroTik RouterBoard hAP
Class
N300
Launch Date
2014
Dimensions
113 x 89 x 28 mm
Wifi Standards
IEEE 802.11b/g/n
Product Overview
MikroTik RouterBoard hAP Specification
| Overview The MikroTik RouterBoard hAP was launched in 2014 and is a N300 class router. | |||
|---|---|---|---|
Model | RouterBoard hAP | ||
Brand | MikroTik | ||
Type | RB951Ui-2nD | ||
Class | N300 | ||
Launch Date | 2014 | ||
Dimensions | 113 x 89 x 28 mm | ||
| Network Mobile networks are supported. The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats. The coverage is supported by 2 x 1.5 dBi internal antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range. The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 300 Mbps. Security protocols offered by the MikroTik RouterBoard hAP are WEP WPA WPA2 WPS. | |||
Mobile Network | yes, with USB dongle | ||
VPN Support | no | ||
Antennas | 2 x 1.5 dBi internal | ||
Wifi Standards | IEEE 802.11b/g/n | ||
Wifi Speed | 300 Mbps | ||
Transmit Power | 22 dBm | ||
Security | WEP WPA WPA2 WPS | ||
Guest Network | no | ||
| System It's powered by a Qualcomm Atheros QCA9531 @ 650 MHz processor, and contains 64 MB of ram. The power supply is a 24 V / 0.8 A power supply. The router supports the IPv4 protocols. | |||
Chipset | Qualcomm Atheros QCA9531 @ 650 MHz | ||
Ram | 64 MB | ||
Flash | 16 MB | ||
Operating System | RouterOS | ||
Power Supply | 24 V / 0.8 A | ||
Protocols | IPv4 | ||
| Connectivity You're looking at 4 x 10/100 Mbps LAN (local area network) connection ports, with 1 x 10/100 Mbps WAN (wide area network) ports available. | |||
LAN Ports | 4 x 10/100 Mbps | ||
WAN Ports | 1 x 10/100 Mbps | ||
Usb Ports | 1 x USB 2.0 | ||
Print Server | no | ||
File Server | no | ||
| Login/Admin Details The Default IP to login to the admin area of the MikroTik RouterBoard hAP is 192.168.88.1. You can log in to the router by using the username "admin" and the password of "[blank]" provided it hasn't been changed. | |||
Default IP | 192.168.88.1 | ||
Default Username | admin | ||
Default Password | [blank] | ||
