About EnGenius
EnGenius EAP300
Class
N300
Launch Date
2011
Dimensions
120 x 120 x 50 mm
Wifi Standards
IEEE 802.11b/g/n
Product Overview
EnGenius EAP300 Specification
| Overview The EnGenius EAP300 was launched in 2011 and is a N300 class router. The router comes in at a weight of 281 g and dimensions of 120 x 120 x 50 mm. | |||
|---|---|---|---|
Model | EAP300 | ||
Brand | EnGenius | ||
Type | EAP300 | ||
Class | N300 | ||
Launch Date | 2011 | ||
Dimensions | 120 x 120 x 50 mm | ||
Weight | 281 g | ||
| Network Mobile networks are not supported. The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats. The coverage is supported by 1 x 5 dBi internal antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range. The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 300 Mbps. Security protocols offered by the EnGenius EAP300 are WEP WPA WPA2. | |||
Mobile Network | no | ||
VPN Support | no | ||
Antennas | 1 x 5 dBi internal | ||
Wifi Standards | IEEE 802.11b/g/n | ||
Wifi Speed | 300 Mbps | ||
Transmit Power | 29 | ||
Security | WEP WPA WPA2 | ||
Guest Network | no | ||
| System It's powered by a Realtek RTL8196C @ 400 MHz processor, and contains 32 MB of ram. The power supply is a 12 V / 1 A power supply. So if you're looking for a 12v router, this might the one! The router supports the IPv4 protocols. | |||
Chipset | Realtek RTL8196C @ 400 MHz | ||
Ram | 32 MB | ||
Flash | 4 MB | ||
Operating System | EnGenius | ||
Power Supply | 12 V / 1 A | ||
Protocols | IPv4 | ||
| Connectivity You're looking at no LAN (local area network) connection ports, with 1 x 10/100 Mbps WAN (wide area network) ports available. | |||
LAN Ports | no | ||
WAN Ports | 1 x 10/100 Mbps | ||
Usb Ports | no | ||
Print Server | no | ||
File Server | no | ||
| Login/Admin Details The Default IP to login to the admin area of the EnGenius EAP300 is 192.168.1.1. You can log in to the router by using the username "admin" and the password of "admin" provided it hasn't been changed. | |||
Default IP | 192.168.1.1 | ||
Default Username | admin | ||
Default Password | admin | ||
