About Belkin
Belkin F5D8235-4
Class
N300
Launch Date
2011
Wifi Standards
IEEE 802.11b/g/n
Product Overview
Belkin F5D8235-4 Specification
| Overview The Belkin F5D8235-4 was launched in 2011 and is a N300 class router. | |||
|---|---|---|---|
Model | F5D8235-4 | ||
Brand | Belkin | ||
Type | F5D8235-4 | ||
Class | N300 | ||
Launch Date | 2011 | ||
| Network Mobile networks are not supported. The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats. The coverage is supported by 2 x 3 dBi antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range. The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 300 Mbps. Security protocols offered by the Belkin F5D8235-4 are WEP WPA WPA2. | |||
Mobile Network | no | ||
VPN Support | no | ||
Antennas | 2 x 3 dBi | ||
Wifi Standards | IEEE 802.11b/g/n | ||
Wifi Speed | 300 Mbps | ||
Transmit Power | 20 dBm | ||
Security | WEP WPA WPA2 | ||
Guest Network | yes | ||
| System It's powered by a Ralink RT2880 @ 266 MHz processor, and contains 32 MB of ram. The power supply is a 12 V / 1.5 A power supply. So if you're looking for a 12v router, this might the one! The router supports the IPv4 protocols. | |||
Chipset | Ralink RT2880 @ 266 MHz | ||
Ram | 32 MB | ||
Flash | 8 MB | ||
Operating System | Belkin | ||
Power Supply | 12 V / 1.5 A | ||
Protocols | IPv4 | ||
| Connectivity You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available. | |||
LAN Ports | 4 x 10/100/1000 Mbps | ||
WAN Ports | 1 x 10/100/1000 Mbps | ||
Usb Ports | 1 x USB 2.0 | ||
Print Server | yes | ||
File Server | yes | ||
| Login/Admin Details The Default IP to login to the admin area of the Belkin F5D8235-4 is 192.168.2.1. You can log in to the router by using the username "[blank]" and the password of "[blank]" provided it hasn't been changed. | |||
Default IP | 192.168.2.1 | ||
Default Username | [blank] | ||
Default Password | [blank] | ||
