200 x 28 x 140 mm
The TP-Link TL-WR1043ND v1 was launched in 2010 and is a N300 class router.
The router comes in at a weight of 830 g and dimensions of 200 x 28 x 140 mm.
|200 x 28 x 140 mm|
Mobile networks are not supported.
The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats.
The coverage is supported by 3 x 3 dBi RP-SMA antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.
The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 300 Mbps.
Security protocols offered by the TP-Link TL-WR1043ND v1 are WEP WPA WPA2.
|WEP WPA WPA2|
|3 x 3 dBi RP-SMA|
You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available.
|1 x 10/100/1000 Mbps|
|1 x USB 2.0|
|4 x 10/100/1000 Mbps|
It's powered by a Atheros AR9132 @ 400 MHz processor, and contains 32 MB of ram.
The power supply is a 12 V / 1.5 A power supply.
So if you're looking for a 12v router, this might the one!
The router supports the IPv4 protocols.
|Atheros AR9132 @ 400 MHz|
|12 V / 1.5 A|
The Default IP to login to the admin area of the TP-Link TL-WR1043ND v1 is 192.168.1.1.
You can log in to the router by using the username "admin" and the password of "admin" provided it hasn't been changed.