145 x 155 x 35 mm
The Netis WF2780 was launched in 2014 and is a AC1200 class router.
The router comes in at a weight of 285 g and dimensions of 145 x 155 x 35 mm.
|145 x 155 x 35 mm|
Mobile networks are not supported.
The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats.
The coverage is supported by 4 x 5 dBi fixed antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.
The Wifi standards offered are IEEE 802.11a/b/g/n/ac and they're offering connection speeds of 300 + 867 Mbps.
Security protocols offered by the Netis WF2780 are WEP WPA WPA2 WPS.
|4 x 5 dBi fixed|
|300 + 867 Mbps|
|WEP WPA WPA2 WPS|
It's powered by a Realtek RTL8197DN @ 660 MHz processor, and contains 64 MB of ram.
The power supply is a 12 V / 1 A power supply.
So if you're looking for a 12v router, this might the one!
The router supports the IPv4 IPv6 protocols.
|Realtek RTL8197DN @ 660 MHz|
|12 V / 1 A|
You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available.
|4 x 10/100/1000 Mbps|
|1 x 10/100/1000 Mbps|
The Default IP to login to the admin area of the Netis WF2780 is 192.168.1.1.
You can log in to the router by using the username "[blank]" and the password of "[blank]" provided it hasn't been changed.