About JCG
JCG JHR-N825R
Class
N300
Launch Date
2012
Dimensions
170 x 140 x 25 mm
Wifi Standards
IEEE 802.11b/g/n
JCG JHR-N825R Specification
| Overview The JCG JHR-N825R was launched in 2012 and is a N300 class router. | |||
|---|---|---|---|
Model | JHR-N825R | ||
Brand | JCG | ||
Type | JHR-N825R | ||
Class | N300 | ||
Launch Date | 2012 | ||
Dimensions | 170 x 140 x 25 mm | ||
| Network Mobile networks are not supported. The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats. The coverage is supported by 2 x 4 dBi fixed antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range. The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 300 Mbps. Security protocols offered by the JCG JHR-N825R are WEP WPA WPA2. | |||
Mobile Network | no | ||
VPN Support | no | ||
Antennas | 2 x 4 dBi fixed | ||
Wifi Standards | IEEE 802.11b/g/n | ||
Wifi Speed | 300 Mbps | ||
Transmit Power | 19 dBm | ||
Security | WEP WPA WPA2 | ||
Guest Network | no | ||
| System It's powered by a Ralink RT3052 @ 384 MHz processor, and contains 32 MB of ram. The power supply is a 12 V / 1 A power supply. So if you're looking for a 12v router, this might the one! The router supports the IPv4 protocols. | |||
Chipset | Ralink RT3052 @ 384 MHz | ||
Ram | 32 MB | ||
Flash | 4 MB | ||
Operating System | JCG | ||
Power Supply | 12 V / 1 A | ||
Protocols | IPv4 | ||
| Connectivity You're looking at 4 x 10/100 Mbps LAN (local area network) connection ports, with 1 x 10/100 Mbps WAN (wide area network) ports available. | |||
LAN Ports | 4 x 10/100 Mbps | ||
WAN Ports | 1 x 10/100 Mbps | ||
Usb Ports | no | ||
Print Server | no | ||
File Server | no | ||
| Login/Admin Details The Default IP to login to the admin area of the JCG JHR-N825R is 192.168.1.1. You can log in to the router by using the username "admin" and the password of "admin" provided it hasn't been changed. | |||
Default IP | 192.168.1.1 | ||
Default Username | admin | ||
Default Password | admin | ||
