200.7 x 200.7 x 38.1 mm, 7.87 x 7.87 x 1.54" / 200 x 200 x 39 mm
IEEE 802.11a/b/g/n/ac, Wi-Fi 5 (802.11ac); Tri-Band (2.4 & 5 + 5 GHz)
The TP-Link Archer A20 was launched in 2019 and is a AC4000 class router.
The router comes in at a weight of 1.49 kg and dimensions of 200.7 x 200.7 x 38.1 mm.
The router comes in at a weight of 3.48 lb and dimensions of 7.87 x 7.87 x 1.54" / 200 x 200 x 39 mm.
|Archer A20||Archer A20|
|200.7 x 200.7 x 38.1 mm||7.87 x 7.87 x 1.54" / 200 x 200 x 39 mm|
|1.49 kg||3.48 lb|
Mobile networks are not supported.
The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats.
The coverage is supported by 6 x 4 dBi fixed antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.
The coverage is supported by 6 antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.
The Wifi standards offered are IEEE 802.11a/b/g/n/ac and they're offering connection speeds of 750 + 1625 +1625 Mbps.
Security protocols offered by the TP-Link Archer A20 are WEP WPA WPA2 WPS.
|6 x 4 dBi fixed||6|
|IEEE 802.11a/b/g/n/ac||Wi-Fi 5 (802.11ac); Tri-Band (2.4 & 5 + 5 GHz)|
|750 + 1625 +1625 Mbps|
|30 dBm||20 to 30 dBm|
|WEP WPA WPA2 WPS|
It's powered by a Broadcom BCM4908 @ 1.8 GHz processor, and contains 512 MB of ram.
The power supply is a 12 V / 5 A power supply.
The power supply is a 100 to 240 VAC, 50 / 60 Hz power supply.
So if you're looking for a 12v router, this might the one!
The router supports the IPv4 IPv6 protocols.
The router supports the IPv4 IPv6 Link Aggregation WMM protocols.
|Broadcom BCM4908 @ 1.8 GHz|
|512 MB||512 MB|
|12 V / 5 A||100 to 240 VAC, 50 / 60 Hz|
|IPv4 IPv6||IPv4 IPv6 Link Aggregation WMM|
You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available.
|4 x 10/100/1000 Mbps|
|1 x 10/100/1000 Mbps|
|1 x USB 2.0 1 x USB 3.0|
The Default IP to login to the admin area of the TP-Link Archer A20 is 192.168.0.1.
You can log in to the router by using the username "admin" and the password of "admin" provided it hasn't been changed.