AXE7800
2021
347 x 208 x 164 mm
IEEE 802.11a/b/g/n/ac/ax
Overview The Netgear Nighthawk Tri-Band AXE7800 was launched in 2021 and is a AXE7800 class router. The router comes in at a weight of 1010 g and dimensions of 347 x 208 x 164 mm. | |||
---|---|---|---|
Brand | Netgear | ||
Launch Date | 2021 | ||
Package Contents | Nighthawk AXE7800 Tri-Band WiFi 6E Router (RAXE300) Ethernet cable Quick start guide Power adapter | ||
Dimensions | 347 x 208 x 164 mm | ||
Class | AXE7800 | ||
Model | Nighthawk Tri-Band AXE7800 | ||
Weight | 1010 g | ||
Type | RAXE300 | ||
Network Mobile networks are not supported. The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats. The wifi coverage is best for 2500 sq. ft. / 40 devices. Make sure this covers what you need so that you know the router will cover your whole area. The coverage is supported by 6 x external antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range. The Wifi standards offered are IEEE 802.11a/b/g/n/ac/ax and they're offering connection speeds of 600 + 4800 + 2400 Mbps. Security protocols offered by the Netgear Nighthawk Tri-Band AXE7800 are WPA WPA2 WPA3. | |||
Mobile Network | no | ||
LAN Aggregation | yes | ||
Security | WPA WPA2 WPA3 | ||
Wifi Stream Count | 8 | ||
VPN Support | yes | ||
Wifi Speed | 600 + 4800 + 2400 Mbps | ||
Automatic Firmware Updates | yes | ||
Guest Network | yes | ||
Parental Controls | yes | ||
Beamforming | yes | ||
Antennas | 6 x external | ||
Wifi Coverage | 2500 sq. ft. / 40 devices | ||
Wifi Standards | IEEE 802.11a/b/g/n/ac/ax | ||
Connectivity You're looking at 4 x 10/100/1000 Mbps LAN (local area network) connection ports, with 1 x 10/100/1000 Mbps WAN (wide area network) ports available. There are USB ports available in the router. These ports are generally used to be able to connect a printer or external hard drive to the network and allow any devices using the router to interact with them. | |||
WAN Ports | 1 x 10/100/1000 Mbps | ||
Usb Ports | yes | ||
LAN Ports | 4 x 10/100/1000 Mbps | ||
System It's powered by a Quad-core processor @ 1.7 GHz processor, and contains 512 MB of ram. The router supports the IPv6 protocols. | |||
Operating System | Netgear | ||
Chipset | Quad-core processor @ 1.7 GHz | ||
Protocols | IPv6 | ||
Flash | 256 MB | ||
Ram | 512 MB | ||
Login/Admin Details The Default IP to login to the admin area of the Netgear Nighthawk Tri-Band AXE7800 is 192.168.1.1. You can log in to the router by using the username "admin" and the password of "password" provided it hasn't been changed. | |||
Default Username | admin | ||
Default IP | 192.168.1.1 | ||
Default Password | password |