About Linksys
Linksys
  • Total Products

    589

Linksys WRT110

Linksys WRT110
  • Class

    N150

  • Launch Date

    2008

  • Dimensions

    148 x 36 x 170 mm

  • Wifi Standards

    IEEE 802.11b/g/n

Product Overview

Linksys WRT110 Specification

Overview

The Linksys WRT110 was launched in 2008 and is a N150 class router.

The router comes in at a weight of 334 g and dimensions of 148 x 36 x 170 mm.

Model
WRT110
Brand
Linksys
Type
WRT110
Class
N150
Launch Date
2008
Dimensions
148 x 36 x 170 mm
Weight
334 g
Network

Mobile networks are not supported.

The router has built-in VPN support. VPN support allows you to pass all of your internet traffic through a VPN service. Depending on the service, this could hide your location, encrypt your data, and better protect your devices against security threats.

The coverage is supported by 2 x 1.8 dBi internal antennas. Whilst antennas may assist in range, additional antennas tend to help more with ensuring devices can simultaneously connect to the router. They can help avoid interference, along with helping increase signal strength to devices within the usable range.

The Wifi standards offered are IEEE 802.11b/g/n and they're offering connection speeds of 150 Mbps.

Security protocols offered by the Linksys WRT110 are WEP WPA WPA2.

Mobile Network
no
VPN Support
no
Antennas
2 x 1.8 dBi internal
Wifi Standards
IEEE 802.11b/g/n
Wifi Speed
150 Mbps
Transmit Power
16.5 dBm
Security
WEP WPA WPA2
Guest Network
no
System

It's powered by a Ralink RT2780 @ 266 MHz processor, and contains 16 MB of ram.

The power supply is a 12 V / 1 A power supply.

So if you're looking for a 12v router, this might the one!

The router supports the IPv4 protocols.

Chipset
Ralink RT2780 @ 266 MHz
Ram
16 MB
Flash
4 MB
Operating System
Linksys
Power Supply
12 V / 1 A
Protocols
IPv4
Connectivity

You're looking at 4 x 10/100 Mbps LAN (local area network) connection ports, with 1 x 10/100 Mbps WAN (wide area network) ports available.

LAN Ports
4 x 10/100 Mbps
WAN Ports
1 x 10/100 Mbps
Usb Ports
no
Print Server
no
File Server
no
Login/Admin Details

The Default IP to login to the admin area of the Linksys WRT110 is 192.168.1.1.

You can log in to the router by using the username "[blank]" and the password of "admin" provided it hasn't been changed.

Default IP
192.168.1.1
Default Username
[blank]
Default Password
admin

Alternatives to the Linksys WRT110

Copyright 2023 © PickModemRouter. All Rights Reserved.